Plumbers make the readings of the counters and check whether they function correctly and that none of the residents of the block is not he cheat on by their counter just to get lower bills for water consumption.They deal with the replacement of defective meters with new ones, if you notice the occurrence of any irregularities in their operation.
Plastic Pipes are classified by their ring stiffness.
The preferred stiffness classes as described in several product standards are: SN2, SN4, SN8 and SN16, where SN is Nominal Stiffness (kN/m2).
This means that further deflection in time depends of the settlement of the soil around the pipe. Basically, the pipe follows the soil movement or settlement of the backfill, as technicians call it.
This means that good installation of pipes will result in good soil settlement.
Further deflection will remain limited. For flexible pipes, the soil loading is distributed and supported by the surrounding soil.Stresses and strains caused by the deflection of the pipe will occur within the pipe wall. However, the induced stresses will never exceed the allowed limit values. The thermoplastic behavior of the pipe material is such that the induced stresses are relaxing to a very low level.
It has to be noted that induced strains are far below the allowable levels. This flexible behaviour means that the pipe will not fail.It will exhibit only more deflection while keeping its function without breaking. However, rigid pipes by their very nature are not flexible and will not follow ground movements. They will bear all the ground loadings, whatever the soil settlement. This means that when a rigid pipe is subject to excessive loading, it will reach the limit for stress values more quickly and break. It can therefore be concluded that the flexibility of plastic pipes is such that it offers an extra dimension of safety. Buried Pipes need flexibility9Źródło: https://en.wikipedia.org/wiki/Plastic_pipework#Flexibility
Circulating hot water can be used for central heating.Sometimes these systems are called hydronic heating systems.15 Common components of a central heating system using water-circulation include: A supply of fuel, electric power or district heating supply lines A Boiler (or a heat exchanger for district heating) which heats water in the system Pump to circulate the water Radiators which are wall-mounted panels through which the heated water passes in order to release heat into rooms. The circulating water systems use a closed loop; the same water is heated and then reheated. A sealed system provides a form of central heating in which the water used for heating circulates independently of the building's normal water supply. Heating systems in the United Kingdom and in other parts of Europe commonly combine the needs of space heating with domestic hot-water heating.
In this case, the heated water in a sealed system flows through a heat exchanger in a hot-water tank or hot-water cylinder where it heats water from the regular potable water supply for use at hot-water taps or appliances such as washing machines or dishwashers.